Monthly Archives: February 2017

How To Change The Oil In Your Motorcycle

There are a number of regular maintenance tasks that you have to perform on your motorcycle in order to keep it functioning properly. One particular task is changing the oil. Here are a few tips or pointers that will help you complete this task on your own.

You have to realize that changing the oil in your motorcycle on a regular basis is a very important step. One of the many reasons why this is important is because it keeps a fresh supply of oil inside the engine of your motorcycle that will help to keep the inner components of your engine properly lubricated and functioning properly. Over time, oil will begin to thicken and break down due to the constant exposure to the intense heat of the engine. The oil supply will eventually dry up and your engine could be exposed to dangerous wear and tear if that supply is not replenished.

The type of oil that you use is equally as important as the number of times that you change it. Consult your motorcycle manual in order to make sure that you select the right type of oil for your bike. You should also make it a point to change the oil filter every time that you change the oil. A brand new filter will allow oil flow much better than an old filter, which is better for your engine in the long run.

Changing your oil doesn’t have to be a hard task to accomplish. In fact, it is actually one of the easier tasks that you will complete. You just have to make sure that you have the right tools and equipment to complete the job. One particular piece of equipment that you will want to make sure you have is a motorcycle stand. This will help get your bike off the ground so you have enough room to work. It will also keep the motorcycle completely upright to ensure that all old oil is removed from the motorcycle. Also, make sure you have a ratchet and socket set, an oil filter remover, a container that you can use to catch the oil as it drains, and perhaps some shop rags or something absorbent to clean up any oil spills that might occur.

The first step of changing the oil in your motorcycle is to remove the fairing screws in order to free up the fairing lowers. Make sure you get all of the screws. One thing worth mentioning at this point before you get too far into the task. If you’re not sure about any step of the process, be sure to consult your owner manual.

Once you have the fairing lowers removed (if equipped), then it is time to remove the oil drain plug. Locate it and select the right socket for the job. Loosen the plug and get the storage container in place for the oil to drain into. Make sure you complete this step otherwise you’ll have a big mess on your hands, and everywhere else! Let the oil drain until there is no more oil dripping from the motorcycle.

When all of the oil has drained, remove the old oil filter and prepare the new filter for installation. Place a thin layer of grease around the ring edge of the filter. This will help keep the seal properly lubricated and will eliminate any leaks due to dryness and cracking of the filter seal.

With the new filter in place, replace the oil drain plug and remove the oil container that you used to store the old oil. When you have the filter and drain plug securely in place, fill the motorcycle back up with fresh new oil according to the fill limits identified in the owner manual. Check the bike for any leaks once you have it completely filled. If there are no leaks, then you’re all done and you will have successfully changed the oil in your motorcycle.

7 Tips to Improve Your SUV Gas Mileage

There are various ways in which you could improve the gas mileage of your SUV. These seven tips are so easy to implement that you can immediately make your driving more economical.

  • Change your driving style. The car fuel economy depends to a great extent on the speed at which you drive. Refrain yourself from braking and accelerating too often because this consumes a lot of fuel.
  • Reduce Heavy Items. Remove all the heavy items in your SUV that you will not be using today. Any additional weight puts a higher load on the engine and reduces mileage.
  • Avoid Idling of your SUV. When your SUV is idling, while loading or unloading stuff, it wastes a lot of gas.
  • Fine tune the engine. When the engine is well tuned it will run more efficiently. Regular checkups can also expose easily missed failures like a defective oxygen sensor.
  • Check your filters. Clogged air filters would badly affect the car gas mileage.
  • Inflate your tires to the prescribed levels. Driving around with under-inflated tires is not only dangerous, it also consumes a lot of gas. Adequate tire pressure can be found in the manuals that come with your SUV and it should be checked periodically.
  • Make sure you use the best grade of lubrication and motor oils that are specified for your particular SUV and it can indeed save you a lot of money.

Of course the most obvious way to save on fuel would be to buy a vehicle that offers better gas mileage. All the dealers and manufacturers have gas mileage comparison charts for their cars which will help you gain an insight into how many MPG the car will drive.

There is a big difference in the mileage while driving on the highway or when driving in the city. City traffic typically includes a lot of stop and go driving, which is detrimental to your fuel figures.

Basing on the results that you find in the gas mileage comparisons chart you could arrive at a decision as to which SUV would be effective for your usage.

The soaring fuel prices are the main reason why hybrid cars have become a huge hit with people recently.

But simply improving your SUV gas mileage could save you a lot of dollars every year. Don’t you think that it is sensible to drive right and maintain your SUV well in order to have a longer run?

How To Ride Properly Within Your Lane

There are plenty of things that motorcycle riders have to think about when riding down the highway at high speeds. One particular technique of concern is whether or not you are occupying your lane properly. Here are some tips on riding safely and successfully in your lane.

First things first, be certain that you are always leaving yourself enough room. This is key because you need it in order to be able to react quickly in any dangerous situations that might occur. A good rule of thumb for any rider regardless of how experienced you are is to leave at least two seconds between you and the rider behind you.

Next, you have to realize that you are at a huge disadvantage when on the road because of the size of the vehicle you are riding. A motorcycle doesn’t take up much space on the road and you appear to be much narrower than other types of vehicles. This means that oncoming traffic is going to have a hard time seeing you coming. This is why your lighting is so important. When you’re riding by yourself with nobody in front of you, not even another car, you can take your pick when it comes to lane positioning. Some prefer to ride in a position that is further away from oncoming traffic, so more to the right side, and some prefer to ride right down the center of the lane.

If you have another vehicle in front of you, whether it be a car, truck, semi, or other type of vehicle, you should make it a point to first leave plenty of space between you and that vehicle, and then position yourself closer to the center divider line. If you are on a freeway where all lanes are going the same direction, then you don’t have to worry about this one. The reason you want to be closer to the center when trailing behind another vehicle is because it gives you the chance to make yourself visible to oncoming traffic. If you move closer to the center line, oncoming traffic will be able to see you behind the vehicle in front of you if you are not traveling too closely to that vehicle.

When riding with another rider or multiple riders, then the lane positioning can get a little more tricky. The idea though is to make yourself as wide enough as possible. For this reason it is important that riders stagger themselves when traveling together in the same lane. The lead rider should ride either to the right or the left of the lane, and then the rider behind him or her should ride on the opposite side of the lane. This will ensure that both of your headlights are visible to oncoming traffic, making it more likely that oncoming traffic will notice you. Remember, always maintain a safe traveling distance between you and other riders or vehicles.

5 Safety Tips For Motorcycle Riding

Motorcycle riding can be a sport, a mode of transportation, or just a hobby. But whatever reason you have for riding a motorcycle, if you do not keep yourself safe, that single motorized vehicle can inflict some deadly harm. Keeping yourself safe when you ride a motorcycle should be your number one priority, because no matter how much you enjoy riding, the increased risk is not worth the reward.

Tips for Staying Safe on a Motorcycle

  1. Wear a HelmetFalling off a motorcycle can be incredibly dangerous. Falling off a motorcycle without a helmet is going to be fatal. Also, it stops bugs from flying in your mouth. Bees don’t taste good.
  2. Get TrainedA motorcycle is not a bike. If you have never ridden a motorcycle before, there are a number of tricks that help you avoid injury. Learn them.
  3. Speeding is Not SaferWhile speeding may seem like fun on a motorcycle, don’t. It makes it more likely you will spin out, it makes it more likely cars will hit you, and it makes it more likely you will be badly injured in an accident. People speed because they like to feel they are going fast in comparison to their previous speed. If that is the case, drive at 5 miles per hour for an hour or two, then go the speed limit. You will feel like you are flying.
  4. Wear Bright ClothingIt does not matter what color your motorcycle is, you still want to make yourself as bright as possible. Leather jackets when driving at night may fit the general stereotype of motorcycle riders, but it’s not a good idea. Unless it is neon green leather. That’s the one exception.
  5. Always Get Enough SleepA motorcycle has inherent risks that cars do not have. A single swipe or a little of a bump can cause the rider to fly off the handle. Many people have been in cars that gently nicked the sidewalk when the driver was tired, a little drunk or not paying close attention. In a car that’s not a big deal. In a motorcycle, you could die. Since sleep makes it less likely for you to focus attention and more likely for you to make poor decisions, make sure you are always well rested before riding a motorcycle.

Motorcycles can be a lot of fun. As long as you take all the safety precautions – most of which are very easy and are of little inconvenience – you will be able to stay safe and continue riding.

Tips To Buy A Lift Kit For Your SUV

An SUV itself is a symbol of class and style. Adding a little touch-up by installing a lift kit to it only adds to the glamor. Make sure that you do not get confused between a parking lift and a lift kit. A parking lift is something which helps in the parking or the repairing process of a car. And what does a lift kit do? It is a part which lifts the frame of an automobile and makes it higher than usual. In short, a parking lift gets used to lift an entire car to a certain height. On the other hand, a lift kit is a modification which lifts either the frame or just the car’s suspension.

What happens when a kit gets installed? It gives the car a higher profile. The wells of the wheels become higher, and therefore, the ordinary tires get replaced with taller tires. There are mainly two types of lift kits: the suspension lifts and the body lifts.

If you take an interest in installing a kit into your SUV and turning it into a true “Road Monster“, you need to know the difference between these two types. Moreover, you must also have a little idea about how to buy them.

Suspension vs. Body

The suspension lift kit is all about high performance. It is an expensive kit, but your car will have enhanced capabilities in rough terrain like a rocky surface or a dirt track. The body lift kit is all about visual effects. It is cheaper than the suspension lift, and is easier to install. The tires are obviously bigger, but have minimal effect on the ride quality.

Tips on Buying a Lift Kit for your SUV

It is totally up to you to choose which type of lift kit you want for your SUV. But before the purchase, there are a few things you need to keep in mind. Here are a few tips:

#1. Safety: You need to remember that a kit can make your SUV prone to rollovers because of an elevated center of gravity. However, having a higher seat means that you will have better visibility. Measure all the pros and cons before buying it.

#2. Ride Quality: It is possible that you may not get the same comfort that you had with your normal car. Always ask for a test drive on a different “raised” SUV. An off-road trip will obviously become more enjoyable. But what you need to check is your comfort level on a normal road.

#3. New Tires & Rim: Owners often tend to buy new tires and rim to make the car look more appealing. And this addition makes the project more expensive. If you do make up your mind to buy new tires, make sure that you recalibrate your speedometer.

How to Find Classic Car Parts

The Classic Car Club of America distinguishes a classic car as those between 1925 and 1948. They note that classic cars are produced in limited quantities and sold at a higher price. They further explain that a 25 year-old car will qualify as classic since the normal shelf life of a vehicle is 10 to15 years only.

Owning a classic car is a great investment for car enthusiasts. The price value appreciates as it ages. The only problem or challenge most collectors encounter is when they need to change some car parts and accessories. The classic car parts are not usually available in typical automobile shops.

Owners can still look for specialty stores that carry car parts for outdated models. Shopping for a classic car part is now easy with the use of internet. They can search the internet for dealers who are engaged in restoring and selling classic car parts. They can look at the classic car classifieds for easy access on complete lists of sellers.

Placing an order through the internet is easy. It will only take a few minutes. The buyer will have to use his credit card to pay. The product will be sent through courier service once the payment is received and confirmed. Deliveries usually only takes a couple of days depending on the courier service provider.

Join groups and organizations having the same interest in classic cars. You will be able to get a lot of tips from them regarding where to go for hard-to-find parts, what shop best restores a classic car, or maybe recommend an excellent mechanic who offers door to door service.

It is also fun to hangout with people of the same interest. You can do things together like watching car racing competitions, going to exhibits, or sharing each other’s experiences on how you got your collection. You might be able to influence them positively in some way.

Some automobile shops are providing catalogs for their classic cars and parts. They could be ordered online and is to be sent through mail. Included in the catalog are photos and specifications of available parts.